Use Run Tests step for C#

info

Currently, the new Test step doesn't yet support TI for C#. Until support is added for this language, you can continue to use the Run Tests step for TI with C#.

note

Currently, TI for C# is behind the feature flag TI_DOTNET. Contact Harness Support to enable the feature.

Enable TI for C#

You can enable TI for C# in three steps:

1. Add the Run Tests step.
2. Trigger test selection.
3. (Optional) Add test splitting.

Add the Run Tests step

Add the Run Tests step to the Build stage in a CI pipeline.

info

To use TI for C#, you must use .NET Core or NUnit.

You must select Run only selected tests (runOnlySelectedTests: true) to enable Test Intelligence. For information about each setting, go to Run Tests step settings.

             - step:
                  type: RunTests
                  identifier: runTestsWithIntelligence
                  name: runTestsWithIntelligence
                  spec:
                    connectorRef: account.harnessImage ## Specify if required by your build infrastructure.
                    image: mcr.microsoft.com/dotnet/sdk:6.0 ## Specify if required by your build infrastructure.
                    language: Csharp
                    buildEnvironment: Core
                    frameworkVersion: "6.0"
                    buildTool: Dotnet ## Specify Dotnet or Nunit.
                    args: --no-build --verbosity normal ## Equivalent to 'dotnet test --no-build --verbosity normal' in a Run step or shell.
                    namespaces: aw,fc
                    runOnlySelectedTests: true ## Must be 'true' to enable TI.
                    preCommand: |-
                      dotnet tool install -g trx2junit
                      export PATH="$PATH:/root/.dotnet/tools"
                      dotnet restore
                      dotnet build
                    postCommand: trx2junit results.trx
                    reports: ## Reports must be in JUnit XML format.
                        type: JUnit
                        spec:
                          paths:
                            - results.xml

For additional YAML examples, go to Pipeline YAML examples

Trigger test selection

After adding the Run Tests step, trigger test selection. You need to run your pipeline twice to trigger test selection.

Trigger test selection with a webhook trigger (Recommended)

1. If your pipeline doesn't already have one, add a webhook trigger that listens for Pull Request or Push events in your codebase.

2. Activate the trigger by opening a PR or pushing changes to your codebase, and then wait while the build runs. You can monitor the build's progress on the Build details page.

   If you created a PR, merge the PR after the build runs.

3. To trigger test selection, activate the trigger again (by opening a PR or pushing changes to your codebase).

   The first run with TI doesn't apply test selection, because Harness must establish a baseline for comparison in future runs. After establishing a baseline, each time this pipeline runs, Harness can select relevant tests to run based on the content of the code changes.

4. Wait while the build runs, and then review the test results and test selection. If you created a PR, merge the PR after the build runs.

Trigger test selection with a manual build

1. Open a PR or push changes to your pipeline's codebase, and then run your pipeline.

   If you opened a PR, select Git Pull Request for Build Type, and enter the PR number.

   If you pushed changes, select Git Branch for Build Type, and then enter the branch name.

   

2. Wait while the build runs. You can monitor the build's progress on the Build details page.

   If you created a PR, merge the PR after the build runs.

3. To trigger test selection, open a new PR (or push changes) to your codebase, and then run your pipeline again.

   The first run with TI doesn't apply test selection, because Harness must establish a baseline for comparison in future runs. After establishing a baseline, each time this pipeline runs, Harness can select relevant tests to run based on the content of the code changes.

4. Wait while the build runs, and then review the test results and test selection. If you created a PR, merge the PR after the build runs.

Why do I have to run the pipeline twice?

The first time you run a pipeline after adding the Run Test step, Harness creates a baseline for test selection in future builds. Test selection isn't applied to this run because Harness has no baseline against which to compare changes and select tests. You'll start seeing test selection and time savings on the second run after adding the Run Tests step.

Add test splitting

Once you start saving time with test selection, you can further optimize test times by enabling parallelism (test splitting) for TI.

You can also configure TI to ignore tests or files.

Pipeline YAML examples

Harness Cloud

This example shows a pipeline that uses Harness Cloud build infrastructure and runs tests on C# with .NET Core and Test Intelligence.

pipeline:
  name: Test Intelligence Demo
  identifier: testintelligencedemo
  projectIdentifier: default
  orgIdentifier: default
  properties:
    ci:
      codebase:
        build: <+input>
        connectorRef: YOUR_CODEBASE_CONNECTOR_ID
  stages:
    - stage:
        type: CI
        identifier: Build_and_Test
        name: Build and Test
        spec:
          cloneCodebase: true
          execution:
            steps:
              - step:
                  type: RunTests
                  identifier: runTestsWithIntelligence
                  name: runTestsWithIntelligence
                  spec:
                    language: Csharp
                    buildEnvironment: Core
                    frameworkVersion: "6.0"
                    buildTool: Dotnet ## Specify Dotnet or Nunit.
                    args: --no-build --verbosity normal ## Equivalent to 'dotnet test --no-build --verbosity normal' in a Run step or shell.
                    namespaces: aw,fc
                    runOnlySelectedTests: true ## Must be 'true' to enable TI.
                    preCommand: |-
                      dotnet tool install -g trx2junit
                      export PATH="$PATH:/root/.dotnet/tools"
                      dotnet restore
                      dotnet build
                    postCommand: trx2junit results.trx
                    reports: ## Reports must be in JUnit XML format.
                        type: JUnit
                        spec:
                          paths:
                            - results.xml
          platform:
            arch: Amd64
            os: Linux
          runtime:
            spec: {}
            type: Cloud

Self-managed

This example shows a pipeline that uses a Kubernetes cluster build infrastructure and runs tests on C# with .NET Core and Test Intelligence.

pipeline:
  name: Test Intelligence Demo
  identifier: testintelligencedemo
  projectIdentifier: default
  orgIdentifier: default
  properties:
    ci:
      codebase:
        build: <+input>
        connectorRef: YOUR_CODEBASE_CONNECTOR_ID
  stages:
    - stage:
        type: CI
        identifier: Build_and_Test
        name: Build and Test
        spec:
          cloneCodebase: true
          execution:
            steps:
              - step:
                  type: RunTests
                  identifier: runTestsWithIntelligence
                  name: runTestsWithIntelligence
                  spec:
                    connectorRef: account.harnessImage ## Specify if required by your build infrastructure.
                    image: mcr.microsoft.com/dotnet/sdk:6.0 ## Specify if required by your build infrastructure.
                    language: Csharp
                    buildEnvironment: Core
                    frameworkVersion: "6.0"
                    buildTool: Dotnet ## Specify Dotnet or Nunit.
                    args: --no-build --verbosity normal ## Equivalent to 'dotnet test --no-build --verbosity normal' in a Run step or shell.
                    namespaces: aw,fc
                    runOnlySelectedTests: true ## Must be 'true' to enable TI.
                    preCommand: |-
                      dotnet tool install -g trx2junit
                      export PATH="$PATH:/root/.dotnet/tools"
                      dotnet restore
                      dotnet build
                    postCommand: trx2junit results.trx
                    reports: ## Reports must be in JUnit XML format.
                        type: JUnit
                        spec:
                          paths:
                            - results.xml
          infrastructure:
            type: KubernetesDirect
            spec:
              connectorRef: YOUR_KUBERNETES_CLUSTER_CONNECTOR_ID
              namespace: YOUR_KUBERNETES_NAMESPACE
              automountServiceAccountToken: true
              nodeSelector: {}
              os: Linux

Run Tests step settings

The following information explains how to configure most settings for the Run Tests step. You might not need all settings for all scenarios; some settings are optional, and some settings are only available for specific languages, build tools, or build infrastructures.

Container Registry and Image

The build environment must have the necessary binaries for the Run Tests step to execute your test commands. Depending on the stage's build infrastructure, Run Tests steps can use binaries that exist in the build environment, or use Container Registry and Image to pull an image, such as a public or private Docker image, that contains the required binaries. You can also install tools at runtime in Pre-Command, provided the build machine or image can execute the necessary commands, such as curl commands to download files.

When are Container Registry and Image required?

The stage's build infrastructure determines whether these fields are required or optional:

• Kubernetes cluster build infrastructure: Container Registry and Image are always required.
• Local runner build infrastructure: Run Tests steps can use binaries available on the host machine. The Container Registry and Image are required if the machine doesn't have the binaries you need.
• Self-managed AWS/GCP/Azure VM build infrastructure: Run Tests steps can use binaries that you've made available on your build VMs. The Container Registry and Image are required if the VM doesn't have the necessary binaries. These fields are located under Additional Configuration for stages that use self-managed VM build infrastructure.
• Harness Cloud build infrastructure: Run Tests steps can use binaries available on Harness Cloud machines, as described in the image specifications. The Container Registry and Image are required if the machine doesn't have the binaries you need. These fields are located under Additional Configuration for stages that use Harness Cloud build infrastructure.

What are the expected values for Container Registry and Image?

For Container Registry, provide a Harness container registry connector, such as a Docker connector, that connects to the container registry where the Image is located.

For Image, provide the FQN (fully-qualified name) or artifact name and tag of a Docker image that has the binaries necessary to run the commands in this step, such as mcr.microsoft.com/dotnet/sdk:6.0. If you don't include a tag, Harness uses the latest tag.

You can use any Docker image from any Docker registry, including Docker images from private registries. Different container registries require different name formats:

• Docker Registry: Enter the name of the artifact you want to deploy, such as library/tomcat. Wildcards aren't supported. FQN is required for images in private container registries.
• ECR: Enter the FQN of the artifact you want to deploy. Images in repos must reference a path, for example: 40000005317.dkr.ecr.us-east-1.amazonaws.com/todolist:0.2.
• GCR: Enter the FQN of the artifact you want to deploy. Images in repos must reference a path starting with the project ID that the artifact is in, for example: us.gcr.io/playground-243019/quickstart-image:latest.

Language

Select C#.

Build Tool

Select the build automation tool: DOTNET CLI or NUnit.

Build Environment

Select the build environment to test.

Framework Version

Select the framework version to test.

Namespaces

You can supply a comma-separated list of namespace prefixes that you want to test.

Build Arguments

Enter commands to use as input or runtime arguments for the build tool. You don't need to repeat the build tool, such as dotnet; this is declared in Build Tool.

For .NET, provide runtime arguments for tests, such as /path/to/test.dll /path/to/testProject.dll.

For NUnit, provide runtime executables and arguments for tests, such as . "path/to/nunit3-console.exe" path/to/TestProject.dll --result="UnitTestResults.xml" /path/to/testProject.dll.

info

• Harness expects dll injection. csproj isn't supported.
• Don't inject another instrumenting agent, such as a code coverage agent, in the args string.
• For NUnit, you must include both runtime arguments and executables in the args string.

Test Report Paths

This setting is required for the Run Tests step to publish test results.

Specify one or more paths to files that store test results in JUnit XML format. Glob is supported.

You can add multiple paths. If you specify multiple paths, make sure the files contain unique tests to avoid duplicates.

Test Splitting (parallelism)

Used to enable test splitting (parallelism) for TI.

Pre-Command, Post-Command, and Shell

• Pre-Command: You can enter commands for setting up the environment before running the tests, such as:

  dotnet tool install -g trx2junit
  export PATH="$PATH:/root/.dotnet/tools"
  dotnet restore
  dotnet build

• Post-Command: You can enter commands used for cleaning up the environment after running the tests, such as trx2junit results.trx.

• Shell: If you supplied a script in Pre-command or Post-command, select the corresponding shell script type.

Packages

This setting is required for C#. Provide a comma-separated list of source code package prefixes, such as com.company., io.company.migrations.

Run Only Selected Tests

This option must be selected (true) to enable Test Intelligence.

If this option is not selected (false), TI is disabled and all tests run on every build.

Test Globs

You can override the default test globs pattern. For example, if the default pattern is **/*Tests.csproj, you could override this with any other pattern, such as **/*Test_*.cs.

Environment Variables

You can inject environment variables into the step container and use them in the step's commands. You must input a Name and Value for each variable.

You can reference environment variables in the Build Arguments, Pre-Command, or Post-Command scripts by name, such as $var_name.

Variable values can be fixed values, runtime inputs, or expressions. For example, if the value type is expression, you can input a value that references the value of some other setting in the stage or pipeline.

Using an expression for an environment variable's value.

Stage variables

Stage variables are inherently available to steps as environment variables.

Additional container settings

Settings specific to containers are not applicable in a stages that use VM or Harness Cloud build infrastructure.

Image Pull Policy

If you specified a Container Registry and Image, you can specify an image pull policy:

• Always: The kubelet queries the container image registry to resolve the name to an image digest every time the kubelet launches a container. If the kubelet encounters an exact digest cached locally, it uses its cached image; otherwise, the kubelet downloads (pulls) the image with the resolved digest, and uses that image to launch the container.
• If Not Present: The image is pulled only if it isn't already present locally.
• Never: The image is not pulled.

Run as User

If you specified a Container Registry and Image, you can specify the user ID to use for running processes in containerized steps.

For a Kubernetes cluster build infrastructure, the step uses this user ID to run all processes in the pod. For more information, go to Set the security context for a pod.

Privileged

For container-based build infrastructures, you can enable this option to run the container with escalated privileges. This is equivalent to running a container with the Docker --privileged flag.

Set Container Resources

These settings specify the maximum resources used by the container at runtime. These setting are only available for container-based build infrastructures, such as a Kubernetes cluster build infrastructure.

• Limit Memory: The maximum memory that the container can use. You can express memory as a plain integer or as a fixed-point number using the suffixes G or M. You can also use the power-of-two equivalents Gi and Mi. The default is 500Mi.
• Limit CPU: The maximum number of cores that the container can use. CPU limits are measured in CPU units. Fractional requests are allowed. For example, you can specify one hundred millicpu as 0.1 or 100m. The default is 400m. For more information go to Resource units in Kubernetes.

Timeout

The timeout limit for the step. Once the timeout is reached, the step fails and pipeline execution proceeds according to any Step Failure Strategy settings or Step Skip Condition settings.

Troubleshoot Test Intelligence

Go to the CI Knowledge Base for questions and issues related to Test Intelligence, including:

• Does Test Intelligence split tests? Can I use parallelism with Test Intelligence?
• Test Intelligence call graph is empty.
• If the Run Tests step fails, does the Post-Command script run?